How to Upgrade Your Toyota Electronic Throttle System

How to Upgrade Your Toyota Electronic Throttle System

A Toyota electronic throttle-distribution unit (ETC) is one of the most important pieces of equipment in your vehicle.toyota electronic throttle controller It will help you to optimize fuel mileage, maintain your engine speed, as well as, increase your vehicle performance and safety. But did you know that the electronic throttle can also be responsible for damaging your vehicle? As with most things in life, it's not a good idea to overload a system. This is especially true if you are an experienced driver with many miles logged on your vehicle.

One of the first places you should look to protect your Electronic Throttle Control is under your power steering pump.toyota electronic throttle controller toyota electronic throttle controller If you hear unusual noises when driving or come upon excessive wear and tear on the power steering pump itself, it is time to check your Electronic Throttle Control. Although your power steering pump is under the hood, there is still plenty of space to get the job done. If you notice excessive wear in either of the paddles, you need to remove the entire power steering pump and lubricate the moving parts. Make sure you read your manufacturer's manual to understand exactly what kind of damage you are responsible for causing. The best way to be safe is to always be informed.

Next, it's important that you understand the proper way to operate your throttle. For those who are new to using their Vehicle Stability Assist (VSA) they need to make sure that they keep the transmission pan fully extended. When lowering your foot from the transmission it is important that the strut brace is disconnected from the strut. If you fail to follow these steps you could cause serious damage to your Vehicle Stability Assist system.

After disengaging the VSA system you should then engage the throttle with your foot. As soon as you see the engine speed drop, you must immediately apply more pressure on the pedal. If you don't do this, your engine speed will continue to drop and the clutch will not engage. If you have not properly followed the steps above, you could be causing engine damage.

After disengaging the electric motor, you should then focus on raising the suspension. You want to make sure that it is correctly in place, especially if it is made out of fiberglass. After you have raised the suspension you should then focus on lowering the rear shocks. Be sure that they are below the tread bar and that the oil cover is lowered enough so that you can get a wrench to remove the oil.

It is very important that you lower the vehicle while keeping an eye on the engine to ensure that it does not start. If your vehicle did not come with a manual transmission, then you should have a professional transfer the engine onto a manual transmission. Once you have transferred the engine onto the transmission, you should then be able to remove the old electrical motor and put the new one back into your vehicle.

Tags:customized car electronic throttle controller