KUNFINE Bluetooth Adapter For M06 Hands-Free Call Kit Special Digital Music CD Changer And Remote Control Unit

KUNFINE Bluetooth Adapter Hands-Free Call Kit Special For M06 Digital Music CD Changer And Remote Control Unit

Note:

This Adapter Only For Yatour Digital Music Changer(M06) and iPod Adapter(M05)and Digital Media Changer (M07). Please confirm your yatour item can use this item first before you want to purcharse.

Introduction

Instruction for YT-BTM Module Unit

Instruction for Remote Control Unit

Connection Diagram

Installation Instructions

On the premise of already-installed YATOUR Adapter, connect YT-BTM to YATOUR Adapter Bluetooth slot, and connect the microphone to

YT-BTM microphone slot, then amount the microphone in a proper position. For better vocal effects, the microphone is suggested to be installed

near the driver's cab , such as A-pillar upper part or on top of rearview mirror or headliner console. , then organize the cables to complete installation.

If you have bought the Remote Control Unit, you can amount YT-BTM in a concealed position but should be accessible for the Remote Control Unit.

 

Function

 

YT-BTM will only work in the YATOUR Adapter mode. After installation of YT-BTM, turn on the car stereo and switch to YATOUR Adapter

playback mode, YT-BTM will be automatically searched and connected to the last connected Bluetooth enabled mobile phone. Once the connection is

successful, YT-BTM LED indicator will keep lighting. If YT-BTM cannot be found by the last connected mobile phone, it will be

automatically  redirected to the Pairing Status, this status keeps 3 minutes, YT-BTM LED indicator is fast flashing within this 3-minute interval.

After then it will be automatically redirected to the non-Pairing Status, meanwhile YT-BTM LED indicator is slow flashing. In this non-Pairing Status,

YT-BTM will not be  searched or recognized.

Note: The mobile phone must be Bluetooth enabled.

 

Operation Instructions

1. Pairing Connection

I. After YT-BTM being powered on, it will automatically direct to the Bluetooth Pairing Status, meanwhile YT-BTM LED indicator is fast flashing,

this status keeps 3 minutes.

II. Within this 3-minute interval, activate your phone Bluetooth function, search a Bluetooth device named "YATOUR", and select it to pair with

your phone. If your phone asks for a pin code, enter " 0000" .

Be sure that Bluetooth function on your phone is active or turned on and that the phone is set to be discoverable.

III. After successful connection, YT-BTM LED indicator will keep lighting, which indicates the pairing is done and you can start using your phone

hands-free.

IV. If YT-BTM and the phone Bluetooth cannot be paired within the 3-minute Pairing Status, press the Answer/Hang-up button for 3 seconds,

enabling YT-BTM to enter into the Bluetooth Pairing Status again, and repeat the above-mention steps I. II. III.

Note: When pairing, closer distance between the phone and YT-BTM enhances pairing speed.

 

2. Disconnection & Reconnection

If you want to disconnect the Bluetooth function, you can do one of these 3 instructions:

*Turn off the Bluetooth function or disconnect the Bluetooth connection on your phone.

*Press the Answer/Hang-up button for 6 seconds.

*Unplug YT-BTM from YATOUR Adapter.

When YT-BTM is connected to YATOUR Adapter, and you want to connect to another phone, you can follow the steps below:

I. Disconnect the Bluetooth connection from the current-connected phone.

II. Press YT-BTM Answer/Hang-up button for 3 seconds to enter into the Bluetooth Pairing Status, meanwhile YT-BTM LED indicator is fast flashing.

III. Follow the steps of Pairing Connection , select "YATOUR" to pair with another phone.

Note: In the state of Bluetooth disconnection, YT-BTM will automatically connect to the last connected phone by pressing the Answer/Hang-up button.

 

3. Default Automatic Connection

On the premise of successful pairing between YT-BTM and the phone, next time when you turn on the car stereo and select YATOUR

Adapter playback mode, you will hear the Bluetooth connecting prompt tone, implying that YT-BTM and the phone are default to connect automatically.

Note: Some phones may need longer connection time because of different phone configurations.

 

4. Making & Answering Calls

Once you receive a phone call, the car stereo will mute and you will hear the incoming call tone, and you are able to:

Answer A Call - press Answer/Hang-up button; or press Fast Forward or SEEK+ button on the stereo.

End A Call - press Answer/Hang-up button; or press Fast Forward or SEEK+ button on the stereo. You will hear a beeping tone when the call ends.

Reject A Call - press Answer/Hang-up button for 3 seconds; or press Fast Forward or SEEK+ button on the stereo for 3 seconds.

Note: Pressing the radio Fast Forward or SEEK+ button may not be able to answer or hang up a call on some cars.

To make a phone call:

*Dial a phone number on your phone.

*Once the phone is dialing, the music mutes and you start hearing the dialing tone. Once the call is answered, you will start using it hands-free.

*Recalling - Double-click the Answer/Hang-up button, it will call the last called number.

Note:

*If the car stereo is turned off or in a different mode (FM, XM, etc.), and you receive a phone call or want to make a call, please turn on / switch to

YATOUR Adapter playback mode, then YT-BTM is ready for use .

*To make YT-BTM better working, please keep your phone within 6-8 meters (Obstacle-free conditions). If your phone is taken out of the Bluetooth

induction area, the Bluetooth connection will automatically disconnect. When your phone is taken back, YT-BTM will  automatically connect to

your phone on condition that YT-BTM keeps working.

*An incoming call will mute YATOUR Adapter playback and you will hear the incoming call tone from radio speakers. When the call ends,

YATOUR Adapter playback will automatically resume.

*If you want to switch the call conversation from YT-BTM to your phone during a call, you can operate it on your phone.

 

5. Voice Dialing (Your phone must support Voice Dialing)

On the premise of successful pairing between YT-BTM and the phone, in the non-call status, press the Answer/Hang-up button for 3 seconds,

you will hear 2 beeps, implying that it enters into the Voice Dialing status, meanwhile the phone will also give you a prompt sign, then you can

make a call to someone in your phone's contact list by using your normal voice command.

The recognition of YT-BTM Voice Dialing may be weaker than your phone Voice Dialing, due to the microphone sensitivity and the surrounding conditions.

 

6. Streaming your music into stereo (A2DP)

On the premise of successful pairing between YT-BTM and the phone with A2DP function, enter the phone's music playback mode,

stream the music on your phone to the car stereo via YT-BTM, then you can listen to music streamed from your phone wirelessly.

You can control Play / Pause by pressing the Answer/Hang-up button.

When A2DP music is playing, other audio will mute. You can pause A2DP music playback by pressing the Answer/Hang-up button,

or the radio Fast Forward or SEEK+ button. After pause, you can resume A2DP playback by press the Answer/Hang-up button.

 

Package included

1 X YT-BTM Module Unit

1 X Microphone

1 X Remote Control Unit

1 X User Manual